Water Butterfly Valve Elephant WBV3232V-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - Viton, with pneumatic actuator with return springs PA-SA, BKV APL-510N-EX
Water Butterfly Valve Elephant WBV3232V-2W-Fb-H, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, seal - Viton, with pneumatic actuator with return springs PA-SA, BKV APL-510N-EX - DN50 / 16 bar is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.
Description
Description
Butterfly valve WBV3232V-2W-Fb PA-SA APL-510N-EX is designed for use as shut-off or regulating valves for flow control in heat supply systems, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
SA pneumatic actuators are designed for automation of industrial shut-off valves control process - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
APL-510N-EX limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of fault detection.
Technical parameters of Elephant WBVV3232V-2W-Fb-H water disc gate valves, body material - stainless steel AISI 316L, disc material - stainless steel AISI 316L, sealing - Viton, with pneumatic actuator with return springs PA-SA, BKV APL-510N-EX:
Nominal diameter DN, mm | 50 - 300 |
Nominal pressure PN, MPa (kg/cm2) | 1,6 (16) |
Flow direction | double-sided |
Ambient temperature t, ⁰C | From -20 to +200: for VITON |
Tightness in the gate | class A GOST 9544-2015 |
Working medium | VITON: mineral and vegetable oils, animal fats, greases and fuels, hot air, steam. |
Connection to pipeline | interflange |
Gate WBV3232V-2W-Fb PA-SA APL-510N-EX
Dimensions and dimensions of Elephant WBV3232V-2W-Fb-H water disc gate valves, body material - stainless steel AISI 316L, disk material - stainless steel AISI 316L, sealing - Viton, pneumatically operated with return springs PA-SA, BKV APL-510N-EX:
DN | A, mm | B, mm | C, mm | E, mm | G, mm | L, mm | M, mm |
40 | 340.4 | 56 | 109 | 153 | 101 | 33 | 121.4 |
50 | 392.4 | 76 | 109 | 153 | 101 | 45 | 121.4 |
65 | 430.4 | 89 | 134 | 279 | 119 | 48 | 121.4 |
80 | 436.4 | 95 | 134 | 279 | 119 | 49 | 121.4 |
100 | 455.4 | 114 | 134 | 279 | 119 | 55 | 121.4 |
125 | 491.4 | 127 | 157 | 308 | 137.5 | 58 | 121.4 |
150 | 503.4 | 140 | 157 | 308 | 137.5 | 59 | 121.4 |
200 | 580.4 | 177 | 199 | 465 | 175 | 64 | 121.4 |
250 | 670.4 | 203 | 257 | 542 | 226 | 70 | 121.4 |
300 | 715.4 | 242 | 257 | 542 | 226 | 80 | 121.4 |
Sketch of gate WBV3232V-2W-Fb PA-SA APL-510N-EX
Materials Elephant WBV3232V-2W-Fb-H water disc gate valve, body material - stainless steel AISI 316L, disc material - stainless steel AISI 316L, seal - Viton, pneumatically operated with return springs PA-SA, BKV APL-510N-EX:
Name | Material |
Body | Stainless steel AISI 316L/03X16H15M3 |
Cuff | VITON |
Disk | Steel AISI316L (03Х17Н14М3) |
Stem | Steel AISI316L (03Х17Н14М3) |
Stud | AISI316L (03Cr17N14M3) steel |
Sleeve | PTFE |
O-ring | Nitrile NBR |
Plate, Handle | Carbon steel |
Sketch of detailing of gate WBV3232V-2W-Fb PA-SA APL-510N-EX
Technical data of SA pneumatic actuators
Design | with return springs |
Nominal pressure PN, bar | 12 |
Working pressure, bar | 2...8 |
Working medium | Filtered compressed air or non-aggressive gases, oils |
Maximum particle diameter | less than 30 µm2 |
Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
Manual override | is |
Position indicator | open/closed |
Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
Materials of SA pneumatic actuator parts:
№ | Name | Material |
1 | Enclosure | extruded aluminum |
2 | Side plugs | cast aluminum |
3 | Gear | stainless steel |
4 | Piston | steel/aluminum |
5 | Plugs | stainless steel |
6 | Piston ring | NBR |
7 | Springs | spring steel |
8 | Piston bearing | engineering plastic |
9 | Piston ring | NBR |
10 | Plug | NBR |
11 | Thrust ring | engineering plastic |
12 | Ring | engineering plastic |
13 | Washer | stainless steel |
14 | Spring clip | stainless steel |
15 | Indicator | plastic |
16 | Indicator housing | plastic |
17 | Bearing | engineering plastic |
18 | Cam | steel |
19 | Bearing | NBR |
20 | Bearing | engineering plastic |
21 | Bearing | engineering plastic |
22 | Sealing ring | NBR |
23 | Sealing ring | NBR |
24 | Bearing | stainless steel |
25 | Adjustment nut | stainless steel |
26 | Adjustment screw | stainless steel |
27 | Sleeve | aluminum |
Material sketch of SA pneumatic actuator
Characteristics of limit switch unit APL-510N-EX:
Parameter | Significance |
Enclosure | all-weather IP67/ NEMA4 4X,7,9 explosion-proof E EX d IIC T6 |
Compatible devices | quarter-turn pneumatic actuators; - any actuators with shaft rotation by 90 |
Full rotation angle | 90° |
Cable glands | 2 x NPT 3/4” |
Electrical connection | screw terminals 8 points (0.08 - 2.5) mm2 |
Cable gland thread | 2 x NPT 3/4” |
Type of visual indicator | two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red |
Switches/sensors | two mechanical switches two proximity sensors |
Rated voltage, V | 250 |
Rated current, A | 16 |
Permissible ambient temperature, °С | от -20 до +66 |
Average life, cycles | 10 000 000 |
Weight, kg | 1.8 |
Wiring diagram of limit switch unit APL-510N-EX
Specifications
Specifications
-
Country of origin
-
Body material
-
Maximum allowable temperature
-
Connection type
-
Control type
-
Nominal pressure
-
Type of seal
-
Disc material
-
Explosion-proof
-
Torque
-
Manual override
-
Limit switches
-
Feedback sensor
-
Type of pneumatic actuator
-
Angle of rotation
Reviews (0)
Reviews (0)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
Shipping
What countries do you ship to?
What countries do you ship to?
We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.
How long will it take to receive my order?
How long will it take to receive my order?
Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).
Returns and Refunds
How do I return a product?
How do I return a product?
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
How long will it take to receive my refund?
How long will it take to receive my refund?
Refunds are processed within 7 days from when we receive the item(s).