Water Butterfly Valve Elephant WBV1432E-2W-Fb-H, body material - cast iron GGG50, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-105-1, 4M310-08 220V, BKV APL-210N, BPV AFC2000
Water Butterfly Valve Elephant WBV1432E-2W-Fb-H, body material - cast iron GGG50, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-105-1, 4M310-08 220V, BKV APL-210N, BPV AFC2000 - DN150 220V / 16 bar is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.
Description
Description
The butterfly valve is designed for use as shut-off or regulating valves for flow control in heat and water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries. Butterfly valves should be installed only between collar flanges (type 11, row 1, version B according to GOST 33259).
Pneumatic actuator is designed for automation of industrial valve control process with maximum torque up to 2128 Nm. Pneumatic actuator can be installed on various quarter-turn valves according to the instructions. The flanges must comply with iso 5211.
The pneumatic valve is used for control in pneumatic system having NAMUR docking surface for mounting the valve through through holes in the body. Electromagnetic control is realized by means of a voltage coil [napriazhenie_pitaniia].
The electropneumatic rotary positioner is used for controlling pneumatic rotary actuators by means of an electric controller or control system with an analog DC output signal with a range of 4 to 20 mA. The function of the positioner is based on the balancing of forces. The positioner uses a nozzle-flap type device and a feedback servomechanism (spring and lever system) to balance the control and feedback forces when the pneumatic actuator (valve) reaches the position corresponding to the control signal.
Technical parameters of Elephant WBV1432E-2W-Fb-H, body material - cast iron GGG50, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-105-1, 4M310-08 220V, BKV APL-210N, BPV AFC2000:
Nominal diameter DN, mm | 40 - 300 |
Working pressure PN, bar | 16 |
Working medium temperature t, ⁰C | -20 to +120 |
Working medium | water, mineral oils, hydrocarbons, oils, fats |
Flow direction | double-sided |
Connection to pipeline | interflanged |
Body material | cast iron GGG50 |
Butterfly valves WBV1432E-2W-Fb-H, body material - cast iron GGG50, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-105-1, 4M310-08 220V, BKV APL-210N, BPV AFC2000
Dimensions and dimensions of butterfly valves Elephant WBV1432E-2W-Fb-H, body material - cast iron GGG50, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-105-1, 4M310-08 220V, BKV APL-210N, BPV AFC2000:
DN | A, mm | B, mm | A1, mm | W, mm |
150 | 225 | 139 | 495 | 200 |
Sketch Butterfly valves WBV1432E-2W-Fb-H, body material - cast iron GGG50, disk material - stainless steel AISI 316L, seal - EPDM, with pneumatic actuator double action PA-DA-105-1, 4M310-08 220V, BKV APL-210N, BPV AFC2000
Technical parameters of pneumatic actuator PA-DA-105-1:
Name | Significance |
Construction | double action |
Rated torque, Nm | 202 |
Angle of rotation of actuator | 90° |
Working pressure, bar | 8 |
Working medium | filtered compressed air or non-aggressive gases, oils |
Pneumatic actuator PA-DA-105-1
Dimensions and dimensions of the pneumatic actuator PA-DA-105-1:
A, mm | 495 |
A1, mm | 461.5 |
B, mm | 133 |
C, mm | 109.5 |
D, mm | 153 |
E, mm | 57.5 |
F, mm | 64 |
G, mm | 26 |
H, mm | 80 |
I, mm | 30 |
N, mm | 22 |
W, mm | 200 |
J, mm | 102 |
K, mm | 70 |
L, mm | М10х16 |
M, mm | М8х13 |
O, mm | 4 |
P, mm | 4 |
S, mm | M6 |
T, mm | 24 |
U, mm | 32 |
Sketch of dimensions and dimensions of pneumatic actuator PA-DA-105-1
PA-DA-105-1 air actuator parts and materials table:
№ | Name | Material |
1 | Indicator screw | ABS (plastic) |
2 | Position indicator | ABS (plastic) |
3 | Spring clip | Stainless steel 304 |
4 | Washer | Stainless steel 304 |
5 | External washer | Engineering plastic |
6 | Adjustment screw | Stainless steel 304 |
7 | Nut | Stainless steel 304 |
8 | Washer | Stainless steel 304 |
9 | Body | Extruded aluminum |
10 | Piston | Aluminum, die cast |
11 | Piston O-ring | NBR |
12 | Bearing group | Engineering plastic |
13 | End cap O-ring | NBR |
14 | End cap | Cast aluminum, polyester coated |
15 | Fixing screw | Stainless steel 304 |
16 | Internal washer | Engineering plastic |
17 | Sealing ring | NBR |
18 | Bearing | Engineering plastic |
19 | Retainer | Alloy steel |
20 | Gear | Alloy steel |
21 | Bearing | Engineering plastic |
22 | Sealing ring | NBR |
Parts and material sketch of the PA-DA-105-1 pneumatic actuator
Technical characteristics of the pneumatic valve 4m310-08 220V:
Design | spool type |
Nominal pressure PN, MPa (kg/cm2) | 1,2 (12) |
Working pressure, bar | 1,5...8 |
Working medium | filtered compressed air |
Ambient temperature t, ⁰C | +5 to +50 |
Response frequency | 5 cycles/s |
Manual duplication | is |
Degree of protection | IP 65 |
Mounting | through holes in the housing |
Enclosure material | anodized aluminum |
Response time | 0.05 sec. |
Technical parameters of limit switch unit APL-210N:
Name | Value |
Model of limit switch unit | APL-210N |
Maximum voltage of limit switch, V | 250 |
Working environment temperature, °С | -40 to +80 |
Service life, years | 10 |
Limit switch unit APL-210N
Dimensions and dimensions of the APL-210N limit switch unit:
Model | Н, mm | L, mm | B, mm | D, mm | D1, mm | M |
APL-210N | 77 | 112 | 88 | 10 | 5 | 20х1.5 |
Sketch of dimensions and dimensions of limit switch unit APL-210N
Main parameters of the AFC2000 air treatment unit:
Operating pressure, bar | 8 |
Maximum pressure, bar | 10 |
Adjustable pressure range, bar | 0,5 ÷ 9 |
Breaking pressure, bar | 15 |
Air connection | 1/4” |
Operating temperature, C | -5 to +60 |
Filter particle size, µm | 40 |
Oil viscosity | ISO VG 32 |
Weight, kg | 0,395 |
Set composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Air treatment unit AFC2000
Specifications
Specifications
-
Country of origin
-
Body material
-
Maximum allowable temperature
-
Connection type
-
Control type
-
Nominal pressure
-
Type of seal
-
Disc material
-
Explosion-proof
-
Torque
-
Manual override
-
Limit switches
-
Feedback sensor
-
Supply voltage
-
Type of pneumatic actuator
-
Angle of rotation
Reviews (0)
Reviews (0)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
Shipping
What countries do you ship to?
What countries do you ship to?
We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.
How long will it take to receive my order?
How long will it take to receive my order?
Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).
Returns and Refunds
How do I return a product?
How do I return a product?
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
How long will it take to receive my refund?
How long will it take to receive my refund?
Refunds are processed within 7 days from when we receive the item(s).