Water Butterfly Valve Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BKV APL-510N-EX, BPV AFC2000
Water Butterfly Valve Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BKV APL-510N-EX, BPV AFC2000 - DN40 / 16 bar is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Delivery and Shipping
Delivery and Shipping
The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.
Description
Description
Butterfly valve model WBV1413E-2W-Fb PA-DA 4V320-10 APL-510N-EX MON 4V320-10 220V AFC2000 is designed for use as shut-off or regulating valves for flow control in heating, water supply systems, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.
PA-DA pneumatic actuators are designed for automation of industrial shut-off valves control process - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.
Pneumatic actuators 4V320-10 220V are used for control in pneumatic systems with NAMUR docking surface, for installation of actuators through through holes in the body.
The manual doubler with worm gear and HDM reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.
The AFC2000 air treatment unit is designed to purify compressed air from dripping moisture and solid particles, remove condensate, automatically maintain pressure at a preset level, supply lubricant from a reservoir in the compressed air stream to pneumatic system elements with a large capacity range from 500 liters/minute to 10,000 liters/minute. The lubricator (oil atomizer) adds oil with a viscosity of 32 mm²/s (=cSt) at 40°C to the pneumatic system for further lubrication of control components such as pneumatic cylinders and pneumatic valves.
The APL-510N-EX limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.
Technical parameters of Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BKV APL-510N-EX, BPV AFC2000:
Parameter | Value |
Nominal diameter DN, mm | 40 - 300 |
Nominal pressure PN, MPa (kg/cm2) | 1,6 (16) |
Flow direction | bilateral |
Maximum temperature of working medium t, ⁰C | Up to +110 |
Tightness in the gate | class A GOST 9544-2015 |
Working medium | cold and hot water, air without oil and grease, stationary conditioning, slightly aggressive media, other media neutral to the material |
Control type | Bare stem (without handle) / with handle / with electric actuator / with gearbox |
Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BKV APL-510N-EX, BPV AFC2000
Dimensions and dimensions of butterfly valves Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BKV APL-510N-EX, BPV AFC2000:
DN | A, mm | B, mm | C, mm | E, mm | G, mm | F, mm |
40 | 402.4 | 55 | 72 | 153 | 71 | 140 |
50 | 475.4 | 80 | 89 | 174 | 82 | 151 |
65 | 489.4 | 89 | 89 | 174 | 82 | 151 |
80 | 495.4 | 95 | 89 | 174 | 82 | 151 |
100 | 545.4 | 114 | 109 | 216 | 101 | 170 |
125 | 558.4 | 127 | 109 | 216 | 101 | 170 |
150 | 639.4 | 139 | 134 | 279 | 119 | 188 |
200 | 696.4 | 175 | 157 | 308 | 137.5 | 206.5 |
250 | 752.4 | 203 | 174 | 405 | 153 | 222 |
300 | 797.4 | 242 | 174 | 405 | 153 | 222 |
DN | L, mm | M, mm | K, mm | I, mm | X, mm | Y, mm |
40 | 33 | 121.4 | 180 | 104 | 88 | 162 |
50 | 43 | 121.4 | 180 | 104 | 88 | 162 |
65 | 45 | 121.4 | 180 | 104 | 88 | 162 |
80 | 45 | 121.4 | 180 | 104 | 88 | 162 |
100 | 52 | 121.4 | 200 | 115 | 88 | 162 |
125 | 55 | 121.4 | 200 | 115 | 88 | 162 |
150 | 55 | 121.4 | 280 | 158 | 88 | 162 |
200 | 60 | 121.4 | 280 | 158 | 88 | 162 |
250 | 68 | 121.4 | 320 | 165 | 88 | 162 |
300 | 78 | 121.4 | 320 | 165 | 88 | 162 |
Sketch Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BKV APL-510N-EX, BPV AFC2000
Materials of butterfly valves Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BKV APL-510N-EX, BPV AFC2000:
№ | Name | Material |
1 | Body | Cast iron GGG50 |
2 | Disk | High-strength cast iron GGG40 |
3 | Seat seal | EPDM |
4 | Upper stem | AISI 420 steel |
5 | Lower stem | AISI 420 steel |
6, 11 | Retaining ring | AISI 201 steel |
7 | Duster | NBR |
8 | Stem gasket | NBR |
9 | Shaft gasket | AISI 201 steel |
10 | Plug | plastic |
Sketch of parts and materials Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON, BKV APL-510N-EX, BPV AFC2000
Technical data of PA-DA pneumatic actuators:
Design | Double action |
Nominal pressure PN, bar | 12 |
Working pressure, bar | 2...8 |
Working medium | Filtered compressed air or non-aggressive gases, oils |
Maximum particle diameter | less than 30 µm2 |
Operating temperature t, ⁰C | - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air) |
Adjustment range | ± 5 ° for rotation at 0 ° and 90 ° |
Manual override | is |
Position indicator | open/closed |
Operating environment | indoors and outdoors. (All internal and external parts are anti-corrosion coated) |
PA-DA pneumatic actuator
PA-DA pneumatic actuator component materials:
№ | Name | Material |
1 | Enclosure | extruded aluminum |
2 | Side plugs | cast aluminum |
3 | Gear | stainless steel |
4 | Piston | steel/aluminum |
5 | Plugs | stainless steel |
6 | Piston ring | NBR |
7 | Springs | spring steel |
8 | Piston bearing | engineering plastic |
9 | Piston ring | NBR |
10 | Plug | NBR |
11 | Thrust ring | engineering plastic |
12 | Ring | engineering plastic |
13 | Washer | stainless steel |
14 | Spring clip | stainless steel |
15 | Indicator | plastic |
16 | Indicator housing | plastic |
17 | Bearing | engineering plastic |
18 | Cam | steel |
19 | Bearing | NBR |
20 | Bearing | engineering plastic |
21 | Bearing | engineering plastic |
22 | Sealing ring | NBR |
23 | Sealing ring | NBR |
24 | Bearing | stainless steel |
25 | Adjustment nut | stainless steel |
26 | Adjustment screw | stainless steel |
27 | Sleeve | aluminum |
Parts and material sketch of the PA-DA pneumatic actuator
Technical parameters of pneumatic valve 4V320-10 220V:
Name | meaning |
Type of pneumatic valve | slide valve |
Working pressure, bar | 1.5 ÷ 1.8 |
Supply voltage, V | 220 В |
Total power, Va | 4.5 |
Control | double-sided electromagnetic |
Frequency of operation, cycle/sec | 5 |
Pneumatic valve 4V320-10 220V
Dimensions and dimensions of pneumatic valve 4V320-10 220V:
Pneumatic valve model | 4V320-10 |
A, mm | 71.9 |
B, mm | 45 |
C, mm | 94.4 |
D, mm | 27 |
E, mm | 69 |
F, mm | 40 |
I, mm | 24 |
K, mm | 40 |
L, mm | 188.8 |
M, mm | 69.4 |
N, mm | 50 |
O, mm | 82.4 |
P, mm | 24 |
S, mm | 20 |
T, mm | 6.5 |
U, mm | 2.4 |
V, mm | 4 |
H, mm | 82.4 |
Sketch of dimensions and dimensions of pneumatic valve 4V320-10 220V
Technical parameters of the handwheel MON:
Name | Value |
Climatic version | U,UHL,T,OM |
Degree of protection, IP | 67 |
Connection type | ISO 5211 |
Manual doubler MON
Dimensions and dimensions of the handwheel MON:
Model | MON1-250-T26-ISO | MON2-450-T28-ISO | MON3-700-T38-ISO | MON4-1200-T54-ISO |
b1, mm | 14 | 17 | 22 | 27 |
N, mm | 22 | 22 | 28 | 32 |
b2, mm | 14 | 17 | 22 | 27 |
M, mm | 16 | 18 | 22 | 30 |
D1, mm | Ø50 | Ø70 | Ø102 | Ø102 |
4-M1, mm | 4-M6 | 4-M8 | 4-M10 | 4-M10 |
D2, mm | Ø70 | Ø102 | Ø125 | Ø125 |
4-M2, mm | 4-M8 | 4-M10 | 4-M12 | 4-M12 |
E, mm | 70х70 | 95х95 | 114х114 | 129х129 |
D3, mm | Ø50 | Ø70 | Ø102 | Ø125 |
4-Ø1, mm | 4-Ø6.5 | 4-Ø8.5 | 4-Ø10.5 | 4-Ø12.5 |
D4, mm | Ø70 | Ø102 | Ø125 | Ø140 |
4-Ø2, mm | 4-Ø8.5 | 4-Ø10.5 | 4-Ø12.5 | 4-Ø16.5 |
A, mm | 90 | 125 | 140 | 188.5 |
B, mm | 55 | 64 | 71 | 93 |
ØC, mm | Ø88 | Ø110 | Ø129 | Ø174 |
F, mm | 115 | 135 | 166 | 202 |
T, mm | 44 | 62.5 | 70 | 94 |
Y, mm | 145 | 178 | 212 | 280 |
H, mm | 120 | 133 | 180 | 195 |
S, mm | 53 | 56.5 | 68.7 | 84 |
K, mm | 10 | 13 | 12.5 | 15 |
Ø hand wheel, mm | 180 | 200 | 280 | 320 |
Sketch of dimensions and dimensions of the MON handwheel MON
MON handwheel materials:
№ | Name | Material |
1 | Stem for mounting the pneumatic actuator | Steel 45 |
2 | Sealing ring | EPDM |
3 | Fixing spring | Spring steel |
4 | Upper end cover | Aluminum alloy |
5 | Screw | Steel 304 |
6 | Locking bracket (main rod) | Steel 304 |
7 | Housing | Aluminum alloy |
8 | Sealing ring | EPDM |
9 | Gear unit | Cast iron BCh50 |
10 | Transition coupling | Cast iron BCh40 |
11 | Gear stem | Cast iron BCh40 |
Materials of the handwheel
Characteristics of limit switch unit APL-510N-EX:
Parameter | Significance |
Enclosure | all-weather IP67/ NEMA4 4X,7,9 explosion-proof E EX d IIC T6 |
Compatible devices | quarter-turn pneumatic actuators; - any actuators with shaft rotation by 90 |
Full rotation angle | 90° |
Cable glands | 2 x NPT 3/4” |
Electrical connection | screw terminals 8 points (0.08 - 2.5) mm2 |
Cable gland thread | 2 x NPT 3/4” |
Type of visual indicator | two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red |
Switches/sensors | two mechanical switches two proximity sensors |
Rated voltage, V | 250 |
Rated current, A | 16 |
Permissible ambient temperature, °С | от -20 до +66 |
Average life, cycles | 10 000 000 |
Weight, kg | 1.8 |
Main parameters of the AFC2000 air treatment unit:
Operating pressure, bar | 8 |
Maximum pressure, bar | 10 |
Adjustable pressure range, bar | 0,5 ÷ 9 |
Breaking pressure, bar | 15 |
Air connection | 1/4” |
Operating temperature, C | -5 to +60 |
Filter particle size, µm | 40 |
Oil viscosity | ISO VG 32 |
Weight, kg | 0,395 |
Set composition | filter-moisture separator, pressure regulator, lubricator, bracket |
Air treatment unit AFC2000
Specifications
Specifications
-
Country of origin
-
Body material
-
Maximum allowable temperature
-
Connection type
-
Control type
-
Nominal pressure
-
Type of seal
-
Disc material
-
Explosion-proof
-
Torque
-
Manual override
-
Limit switches
-
Feedback sensor
-
Supply voltage
-
Type of pneumatic actuator
-
Angle of rotation
Reviews (0)
Reviews (0)
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Frequently Asked Questions
Shipping
What countries do you ship to?
What countries do you ship to?
We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.
How long will it take to receive my order?
How long will it take to receive my order?
Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).
Returns and Refunds
How do I return a product?
How do I return a product?
Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.
How long will it take to receive my refund?
How long will it take to receive my refund?
Refunds are processed within 7 days from when we receive the item(s).