Elephant  |  SKU: D050-38845

Water Butterfly Valve Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-510N-EX

€350,86
Tax included Shipping calculated at checkout.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

tterfly valve model WBV1413E-2W-Fb PA-DA 4V320-08 APL-510N-EX MON 4V320-08 220V is designed for use as shut-off or regulating valves to control flows in heating systems, water supply, in technological processes of food, chemical, oil and gas, pulp and paper and other industries.

PA-DA pneumatic actuators are designed for automation of industrial shut-off valves control process - gates, ball valves. Pneumatic actuators are designed for operation both indoors and outdoors. All internal and external parts are anticorrosive coated.

Pneumatic actuators 4V320-08 220V are used for control in pneumatic systems with NAMUR docking surface, for installation of actuators through through holes in the body.

The manual doubler with worm gear and HDM reduction gearbox allows manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the full range of manual override applications.

The APL-510N-EX limit switch unit is an electrotechnical device designed to open and close the working circuit and to visualize the positions of the shut-off body of pipeline valves. In a sealed box, as a rule, there are two mechanical switches designed for voltage up to 250 V, which monitor the position of the actuator stem and signalize in extreme positions. They are mounted on top of the actuator surface. In the upper part of the limit switch unit there is a two-color visual indicator hemisphere. If the connected pipe fitting is closed, only the red part of the hemisphere labeled CLOSED is visible; if it is open, only the yellow part labeled OPEN is visible. This visual indicator is clearly visible from a distance, which simplifies the inspection of the equipment, and the color difference between the open and closed position reduces the probability of misinterpretation of information. Due to the use of the BCV it becomes possible to transmit information on the position of pipeline valves (open/closed) to automated control systems, which allows to increase the reliability of the system as a whole and simplifies diagnostics in case of malfunction detection.

 

 

Technical parameters of Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-510N-EX:

Parameter Value
Nominal diameter DN, mm 40 - 300
Nominal pressure PN, MPa (kg/cm2) 1,6 (16)
Flow direction bilateral
Maximum temperature of working medium t, ⁰C Up to +110
Tightness in the gate class A GOST 9544-2015
Working medium cold and hot water, air without oil and grease, stationary conditioning, slightly aggressive media, other media neutral to the material
Control type Bare stem (without handle) / with handle / with electric actuator / with gearbox

Затворы дисковые поворотные DN.ru WBV1413E-2W-Fb Ду40-300 Ру16, чугун, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В, с БКВ APL-510N-EX, с ручным дублером MON1-250-T26-ISO

 

Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-510N-EX

 

 

Dimensions and dimensions of butterfly valves Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-510N-EX:

DN A, mm B, mm C, mm E, mm G, mm
40 402.4 55 72 153 71
50 475.4 80 89 174 82
65 489.4 89 89 174 82
80 495.4 95 89 174 82
100 545.4 114 109 216 101
125 558.4 127 109 216 101
150 639.4 139 134 279 119
200 696.4 175 157 308 137.5
250 752.4 203 174 405 153
300 797.4 242 174 405 153

 

DN F, mm L, mm M, mm K, mm I, mm
40 140 33 121.4 180 104
50 151 43 121.4 180 104
65 151 45 121.4 180 104
80 151 45 121.4 180 104
100 170 52 121.4 200 115
125 170 55 121.4 200 115
150 188 55 121.4 280 158
200 206.5 60 121.4 280 158
250 222 68 121.4 320 165
300 222 78 121.4 320 165

Затворы дисковые поворотные DN.ru WBV1413E-2W-Fb Ду40-300 Ру16, чугун, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В, с БКВ APL-510N-EX, с ручным дублером MON1-250-T26-ISO

Sketch Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-510N-EX

 

 

Materials of butterfly valves Elephant WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-510N-EX:

Name Material
1 Body Cast iron GGG50
2 Disk High-strength cast iron GGG40
3 Seat seal EPDM
4 Upper stem AISI 420 steel
5 Lower stem AISI 420 steel
6, 11 Retaining ring AISI 201 steel
7 Duster NBR
8 Stem gasket NBR
9 Shaft gasket AISI 201 steel
10 Plug plastic

Затворы дисковые поворотные DN.ru WBV1413E-2W-Fb Ду40-300 Ру16, корпус - чугун GGG50, диск - чугун GGG40, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4M310-08 220В, с БКВ APL-510N-EX

Sketch of parts and materials Butterfly valves WBV1413E-2W-Fb-H, body material - cast iron GGG50, disk material - cast iron GGG40, seal - EPDM, with pneumatic actuator double action PA-DA, 4V320-08 220V, handwheel MON, BKV APL-510N-EX

 

Technical data of PA-DA pneumatic actuators:

Design Double action
Nominal pressure PN, bar 12
Working pressure, bar 2...8
Working medium Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter less than 30 µm2
Operating temperature t, ⁰C - 20 to +80 - 40 to +80 (low temperature version) - 20 to +160 (in dry air)
Adjustment range ± 5 ° for rotation at 0 ° and 90 °
Manual override is
Position indicator open/closed
Operating environment indoors and outdoors. (All internal and external parts are anti-corrosion coated)


Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В

PA-DA pneumatic actuator

 

 

PA-DA pneumatic actuator component materials:

Name Material
1 Enclosure extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clip stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjustment nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum
Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В
Parts and material sketch of the PA-DA pneumatic actuator

 

 

Technical parameters of pneumatic valve 4V320-08 220V:

Name meaning
Type of pneumatic valve slide valve
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 В
Total power, Va 4.5
Control double-sided electromagnetic
Frequency of operation, cycle/sec 5

Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В

Pneumatic valve 4V320-08 220V

 

 

Dimensions and dimensions of pneumatic valve 4V320-08 220V:

Pneumatic valve model 4V320-08
A, mm 71.9
B, mm 45
C, mm 94.4
D, mm 27
E, mm 69
F, mm 40
I, mm 24
K, mm 40
L, mm 188.8
M, mm 69.4
N, mm 50
O, mm 82.4
P, mm 24
S, mm 20
T, mm 6.5
U, mm 2.4
V, mm 4
H, mm 82.4

Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, диск - нержавеющая сталь 316L, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4V320-08 220В

Sketch of dimensions and dimensions of pneumatic valve 4V320-08 220V

 

 

Technical parameters of the handwheel MON:

Name Value
Climatic version U,UHL,T,OM
Degree of protection, IP 67
Connection type ISO 5211
Затворы дисковые поворотные DN.ru WBV1132N-2W-Fb Ду40-300 Ру16, корпус - чугун GG25, диск - нержавеющая сталь 316L, уплотнение - NBR, с пневмоприводом PA-DA, с пневмораспределителем 4V320-08 220В, с БКВ APL-210N, с ручным дублером MONManual doubler MON

 

 

Dimensions and dimensions of the handwheel MON:

Model MON1-250-T26-ISO MON2-450-T28-ISO MON3-700-T38-ISO MON4-1200-T54-ISO
b1, mm 14 17 22 27
N, mm 22 22 28 32
b2, mm 14 17 22 27
M, mm 16 18 22 30
D1, mm Ø50 Ø70 Ø102 Ø102
4-M1, mm 4-M6 4-M8 4-M10 4-M10
D2, mm Ø70 Ø102 Ø125 Ø125
4-M2, mm 4-M8 4-M10 4-M12 4-M12
E, mm 70х70 95х95 114х114 129х129
D3, mm Ø50 Ø70 Ø102 Ø125
4-Ø1, mm 4-Ø6.5 4-Ø8.5 4-Ø10.5 4-Ø12.5
D4, mm Ø70 Ø102 Ø125 Ø140
4-Ø2, mm 4-Ø8.5 4-Ø10.5 4-Ø12.5 4-Ø16.5
A, mm 90 125 140 188.5
B, mm 55 64 71 93
ØC, mm Ø88 Ø110 Ø129 Ø174
F, mm 115 135 166 202
T, mm 44 62.5 70 94
Y, mm 145 178 212 280
H, mm 120 133 180 195
S, mm 53 56.5 68.7 84
K, mm 10 13 12.5 15
Ø hand wheel, mm 180 200 280 320
Затворы дисковые поворотные DN.ru WBV1132N-2W-Fb Ду40-300 Ру16, корпус - чугун GG25, диск - нержавеющая сталь 316L, уплотнение - NBR, с пневмоприводом PA-DA, с пневмораспределителем 4V320-08 220В, с БКВ APL-210N, с ручным дублером MONSketch of dimensions and dimensions of the MON handwheel MON

 

 

MON handwheel materials:

Name Material
1 Stem for mounting the pneumatic actuator Steel 45
2 Sealing ring EPDM
3 Fixing spring Spring steel
4 Upper end cover Aluminum alloy
5 Screw Steel 304
6 Locking bracket (main rod) Steel 304
7 Housing Aluminum alloy
8 Sealing ring EPDM
9 Gear unit Cast iron BCh50
10 Transition coupling Cast iron BCh40
11 Gear stem Cast iron BCh40

Затворы дисковые поворотные DN.ru WBV0232E-2W-Fb Ду25-32 Ру16, корпус - алюминевый сплав, уплотнение - EPDM, с пневмоприводом PA-DA двойного действия, с пневмораспределителем 4M310-08 220В, с БКВ APL-510N-EX, с ручным дублером MON1-250-T26-ISO

Materials of the handwheel

 

 

Characteristics of limit switch unit APL-510N-EX:

Parameter Significance
Enclosure all-weather IP67/ NEMA4 4X,7,9
explosion-proof E EX d IIC T6
Compatible devices quarter-turn pneumatic actuators;
- any actuators with shaft rotation by 90
Full rotation angle 90°
Cable glands 2 x NPT 3/4”
Electrical connection screw terminals 8 points (0.08 - 2.5) mm2
Cable gland thread 2 x NPT 3/4”
Type of visual indicator two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red
Switches/sensors two mechanical switches two proximity sensors
Rated voltage, V 250
Rated current, A 16
Permissible ambient temperature, °С от -20 до +66
Average life, cycles 10 000 000
Weight, kg 1.8

Specifications

  • Country of origin
    China
  • Body material
    cast iron GGG50
  • Maximum allowable temperature
    110 °C
  • Connection type
    compact flanged
  • Control type
    Pneumatic actuator
  • Nominal pressure
    16 bar
  • Type of seal
    EPDM
  • Disc material
    cast iron GGG40
  • Explosion-proof
    Yes
  • Torque
    20 Nm
  • Manual override
    handwheel
  • Limit switches
    Yes
  • Feedback sensor
    Limit switches
  • Supply voltage
    220 V
  • Type of pneumatic actuator
    double action
  • Angle of rotation
    90°

Reviews (0)

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D050-38845DN4016 bar €350,86 77 in stock
    D050-38846DN5016 bar €335,72 77 in stock
    D050-38847DN6516 bar €341,18 77 in stock
    D050-38848DN8016 bar €346,40 77 in stock
    D050-38849DN10016 bar €404,01 77 in stock
    D050-38850DN12516 bar €414,02 77 in stock
    D050-38851DN15016 bar €495,81 77 in stock
    D050-38852DN20016 bar €605,16 77 in stock
    D050-38853DN25016 bar €766,89 77 in stock
    D050-38854DN30016 bar €855,69 77 in stock

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).