Ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4M310-08 24V , with BKV APL-210N, with BPV AFC2000

Ball valves are used as shut-off valves in heat and water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. The use of ball valves as regulating valves is not allowed.
Pneumatic rotary actuator is designed to automate the process of control of industrial valves, as well as to determine the position of the valve shut-off body.
Pneumatic control valves are used for control in pneumatic systems with NAMUR docking surface, to install the valves through holes in the housing. Electromagnetic control, is realized by means of voltage coils 12-AC, 12-DC, 24-AC, 24-DC, 110-AC, 220-AC. Depending on the model, the valves have one-way or two-way control. Solenoid operated pneumatic valves have a wide range of models and include common switching types for three (3/2) and five (5/2 and 5/3) line pneumatic valves. They are designed for use with quarter-turn pneumatic actuators.
Limit switch unit is designed for visual and electrical signaling of the end positions of the shut-off valve, valve or disc gate. It is mounted on top of the pneumatic actuator surface and connected to the actuator shaft in DIN standard. The sealed box usually contains two sensors, which monitor the position of the actuator shaft and signalize in extreme positions. OMRON microswitches, inductive sensors or reed switches are used as sensors. Visual indication of the position can be observed on the housing of the unit there is a 3D visual indicator RED-CLOSED and GREEN-OPEN.
Air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure at a preset level, supply lubricant from the tank in the compressed air flow to the elements of the pneumatic system.

Technical parameters of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4M310-08 24V , with BKV APL-210N, with BPV AFC2000:

Dimensions and sizes of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4M310-08 24V , with BKV APL-210N, with BPV AFC2000:

Table of parts and materials of ball valves Elephant BV3232P(2pc)-FP-T-ISO-H DN80-100 16 bar, full bore coupling, stainless steel SS316, seal - PTFE, with pneumatic actuator PA-DA-105-1 double acting, with pneumatic distributor 4M310-08 24V , with BKV APL-210N, with BPV AFC2000:

Technical parameters of pneumatic actuators Elephant PA-DA-105-1

Dimensions and sizes of pneumatic actuators Elephant PA-DA-105-1

Table of parts and materials for pneumatic actuators Elephant PA-DA-105-1

Technical parameters of pneumatic valve Elephant 4M310-08

Dimensions and sizes of the pneumatic valve Elephant 4M310-08

Technical parameters of limit switch units Elephant APL-210N