Ball valves Elephant BV3232P(2pc)-FP-F-ISO-R DN200-250 16 bar full bor – Valve Elephant
Elephant  |  SKU: D160-49413

Ball valves Elephant BV3232P(2pc)-FP-F-ISO-R DN200-250 16 bar full bore flanged, body - stainless steel 316, with double-acting PA-DA pneumatic actuator, pneumatic distributor 4M310-08 24V, LSU APL-510N EX, gearbox MON-ISO and ATU AFC2000

€3.345,44
Tax included Shipping calculated at checkout.

Ball valves Elephant BV3232P(2pc)-FP-F-ISO-R DN200-250 16 bar full bore flanged, body - stainless steel 316, with double-acting PA-DA pneumatic actuator, pneumatic distributor 4M310-08 24V, LSU APL-510N EX, gearbox MON-ISO and ATU AFC2000 - DN200 / 16 bar is backordered and will ship as soon as it is back in stock.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

The ball valve is used as a shut-off valve in heating, water supply, steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve. The use of ball valves as regulating valves is not allowed.

Elephant pneumatic double-acting rotary actuators PADA are designed to automate the process of controlling industrial valves with maximum torque up to 2128 Nm.

The pneumatic valve is used to change the direction, start, stop the compressed air flow in the pneumatic system depending on the external control action.

The worm gear manual doubleturn actuator with reduction gear allows the manual setting of the required positioning of the shut-off valve by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most efficient and effective solution to the full range of manual override applications.

The air treatment unit is designed to clean compressed air from moisture droplets and solid particles, remove condensate, automatically maintain the pressure value at a preset level, supply lubricant from the tank in the compressed air flow to the pneumatic system elements.



Technical parameters of ball valves Elephant BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

Parameter Value
Nominal Pressure PN, bar 16
Operating Temperature, °C -29 to 150
Valve Type Two-way
Application Water supply, heating, industry
Working Medium Water, air, neutral media
Pipeline Connection Flanged
Water-drawing No
Bore Type Full bore
Control Type With pneumatic actuator
Connection Type Flanged
Operation Double-acting pneumatic actuator
Limit Switches No
Pneumatic Distributor Yes
Electro-pneumatic Positioner No
Average Service Life, years 10
Warranty, years 1
Country of Manufacture China

 

 

Dimensions and dimensions of ball valves Elephant BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

DN L D D1 D2 f b H n–Ød Rod square ISO 5211 Weight, kg
mm
200 400 340 295 268 2 24 180 12–Ø22 27х27 F12/F14 118
250 450 405 355 320 2 26 296 12–Ø26 27х27 F12/F14 206
300 610 460 410 378 2 28 305 12–Ø26 36х36 F14 266

Sketch dimensions and dimensions of ball valves Elephant BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

 

 

Table of parts and materials for ball valves Elephant BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

№ Part Name Material
1 Body Stainless steel 316
2 Gasket Stainless steel 316 + Graphite
3 Cover Stainless steel 316
4 Nut Stainless steel ASTM A193 Gr.B8M Cl2
5 Bolt Stainless steel ASTM A193 Gr.B8M Cl2
6 Ball Seal PTFE
7 Ball Stainless steel 316
8 Stem Stainless steel 316
9 Support Pad PTFE
10 Stem Seal PTFE
11 Packing Seal Stainless steel 316
12 Bolt Stainless steel ASTM A193 Gr.B8M Cl2
13 Support Frame Stainless steel 304
14 Gasket Stainless steel 304
15 Stud Stainless steel ASTM A193 Gr.B8M Cl2
16 Nut Stainless steel ASTM A193 Gr.B8M Cl2
17 Cushioning Gasket Stainless steel
18 Stud Stainless steel ASTM A193 Gr.B8M Cl2
19 Nut Stainless steel ASTM A193 Gr.B8M Cl2
20 Gear Transmission Steel 45
22 Screw Stainless steel ASTM A193 Gr.B8M Cl2

Parts and materials sketch for ball valves Elephant BV3232P(2pc)-FP-F-ISO-R full bore flanged, body - stainless steel 316

 

 

Technical data of DA double-acting pneumatic actuators:

Type of pneumatic actuator DA - double-acting
Nominal pressure PN, bar 12
Working pressure, bar 2...8
Working medium filtered compressed air
Maximum particle diameter of the working medium, µm2 ≤30
Ambient temperature, ⁰C -20 to +80
Swivel angle, ° 0 - 90
Swivel angle adjustment, % ±5
Position indicator open/closed
Top connection standard NAMUR
Air connection standard NAMUR
Average life, cycles closed/open 70 000 (for non-aggressive media and medium pressure and temperature values)


DA pneumatic actuators double-acting rotary actuators

 


Dimensions and mounting dimensions of DA double-acting pneumatic actuators:

Model A, mm B, mm C, mm D, mm E, mm F, mm G, mm H, mm
DA-052 30 41,5 65,5 72 92 65 30 80
DA-065 36 47 81 88 108 72 30 80
DA-083 46 57 98,5 108,7 128,7 92 30 80
DA-105 57,5 64 122,5 133 153 109,5 30 80
DA-130 67,5 74,5 145,5 155 185 127,5 30 130
DA-140 75 77 161 172 202 137,5 30 130
DA-160 87 87 184 197 227 159 30 130
DA-210 113 113 235,5 255 285 210 30 130
DA-270 147 147 299 326 356 273 30 130
DA-300 162 174 330 350 380 312 30 130
DA-350 190 195 483 410 440 365 30 130

 

Model I, mm J, mm M, mm N, mm Z, mm d, mm K L
DA-052 36 50 11x11 14 147 40 M5x8 M6x10
DA-065 50 70 14x14 18 168 40 M6x10 M8x13
DA-083 50 70 17x17 21 204 40 M6x10 M8x13
DA-105 70 102 22x22 26 268 40 M8x13 M10x16
DA-130 70 102 22x22 26 301 55 M8x13 M10x16
DA-140 102 125 27x27 31 390 55 M10x16 M12x20
DA-160 102 125 27x27 31 458 55 M10x16 M12x20
DA-210 - 140 36x36 40 532 80 - M16x25
DA-270 - 165 46x46 50 718 80 - M20x25
DA-300 - 165 46x46 50 760 80 - M20x25
DA-350 165 254 46x46 50 920 80 M20x25 8xM16x25

Sketch of dimensions of DA double-acting pneumatic actuators

 

 

Materials of parts for DA double-acting pneumatic actuators:

№ Part name Material
1 Indicator screw ABS plastic
2 Position indicator ABS plastic
3 Spring clip stainless steel 304
4 Metal washer stainless steel 304
5 Pressure washer engineering plastic
6 Housing hard anodized extruded aluminum alloy
7 Pressure washer engineering plastic
8 Limiter alloy steel
9 Shaft sealing ring upper NBR
10 Upper shaft sliding ring engineering plastic
11 Shaft nickel plated alloy steel
12 Shaft sliding ring lower engineering plastic
13 Shaft O-ring lower NBR
14 Plug NBR
15 Seal ring of adjusting screws NBR
16 Washer of adjusting screw stainless steel 304
17 Lock nut of adjusting screw stainless steel 304
18 Adjusting screw stainless steel 304
19 Piston die-cast aluminum alloy
20 Piston guide plate engineering plastic
21 Piston sliding ring engineering plastic
22 Piston O-ring NBR
23 Spring set spring steel
24 Cover O-ring NBR
25 End cap cast aluminum with polyester coating
26 Cover screw stainless steel 304
27 Stop screw stainless steel 304
28 Adapter carbon steel

Material sketch of DA double-acting pneumatic actuators

 

 

Dimensions and dimensions of Elephant 4M310-08 24V pneumatic directional control valve

Model 4M310-08
D, mm 32
E, mm 69
F, mm 40
I, mm 45
K, mm 40
L, mm 134.5
M, mm 40
N, mm 24
S, mm 27
U, mm 2.4
H, mm 17.5

Sketch of dimensions and dimensions of pneumatic valve Elephant 4M310-08 24V

 

 

Technical parameters of the handwheel Elephant MON-ISO

Name Value
Manual override model MON-ISO
Climatic version U, UHL, T, OM
Mounting method Horizontal/Vertical
Protection rating, IP 67
Connection type ISO 5211


 

 

Dimensions and dimensions of the handwheel Elephant MON-ISO

Parameter Value
Model MON4-1200-T54-ISO
b1, mm 27
N, mm 32
b2, mm 27
M, mm 30
D1, mm Ø102
4-M1, mm 4-M10
D2, mm Ø125
4-M2, mm 4-M12
E, mm 129×129
D3, mm Ø125
4-Ø1, mm 4-Ø12.5
D4, mm Ø140
4-Ø2, mm 4-Ø16.5
A, mm 188.5
B, mm 93
ØC, mm Ø174
F, mm 202
T, mm 94
Y, mm 280
H, mm 195
S, mm 84
K, mm 15
Handwheel Ø, mm 320

Sketch of dimensions and dimensions of handwheel Elephant MON-ISO

 

 

Parts and materials table for the handwheel Elephant MON-ISO

№ Component Material
1 Stem for pneumatic actuator mounting Steel 45
2,8 O-ring EPDM
3 Retaining spring Spring steel
4 Upper end cap Aluminum alloy
5 Screw Steel 304
6 Retaining bracket (main linkage) Steel 304
7 Housing Aluminum alloy
9 Gearbox Cast iron BC50
10 Adapter coupling Cast iron BC40
11 Gearbox stem Cast iron BC40

Sketch of parts and materials of the handwheel Elephant MON-ISO

 

 

Technical parameters of Elephant AFC2000 air treatment unit

Parameter Value
Operating pressure, bar 8
Adjustable pressure range, bar 0.5 ÷ 9
Filtered particle size, µm 40 µm
Weight, kg 0.395

 

 

 

Technical parameters of limit switch units Elephant APL-510N EX

Parameter Value
Model of limit switch block APL-510N EX
Ambient temperature, °C from -20 to 66
Service life, years 10

 

 

 

Dimensions and dimensions of Elephant APL-510N EX limit switch units

Parameter Value
Model of limit switch block APL-510N EX
A, mm 118
B, mm 118
C, mm 138.4
D, mm 17
E, mm 19
F, mm 7
G, mm 3
H, mm 4
I, mm 59
J, mm 59
K, mm 59
L, mm 59
M, mm 121.4
Ød1, mm 50
Ød2, mm 5
Sketch of dimensions and dimensions of Elephant APL-510N EX limit switch units



Dimensions and dimensions of Elephant AFC2000 air treatment unit

Parameter Value
Model AFC2000
A, mm 162
B, mm 88
C, mm 139
D, mm 31
E, mm 53.5
F, mm 12
G, mm 8
H, mm 7
I, mm 13.3
J, mm 39
K, mm 5
L, mm 40
M, mm 32
N, mm 53
O, mm 29
P, mm 6
R, mm 41.5

Sketch of dimensions and dimensions of Elephant AFC2000 air treatment unit

 

Passports and certificates

Data sheet for Elephant DA/SA double-acting pneumatic actuator with return springs

 

 

 

Specifications
  • Country of origin
    China
  • Port opening
    full bore
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    150 °C
  • Connection type
    Flanged
  • Control type
    Pneumatically actuated
  • Operating environment
    Water, Air, Neutral Media
  • Type of seal
    PTFE
  • Voltage
    24 V
  • Explosion-proof
    have
  • Torque
    380 Nm
  • Limit switches
    no
  • Type of pneumatic actuator
    double action

Reviews (0)

Documentation
nullAir treatment unit AFC2000 ELEPHANT
nullLimit switch unit ELEPHANT APL-510N EX explosion-proof
nullPneumatic valve ELEPHANT 4M310-08 spool type
nullPneumatic rotary actuator ELEPHANT PA-x-x double-acting and with return springs

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-49413DN20016 bar €3.345,44 0 In stock
    D160-49414DN25016 bar €5.764,54 Sold out

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).