Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H, body material - Stainles – Valve Elephant
Elephant  |  SKU: D160-57470

Ball valves Elephant BV3232P(3pc)-FP-W-ISO-H, body material - Stainless steel AISI 316, seal - PTFE / PTFE / Teflon, with pneumatic actuator double action PA-DA, 4V320-10 220V, handwheel MON

€271,44
Tax included Shipping calculated at checkout.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

Ball valve Elephant BV3232P(3pc)-FP-W-ISO-H RU63/40/25 is used as shut-off valves in heat supply systems, water supply systems, in steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of the BV3232P(3pc)-FP-W-ISO-H Ru63/40/25 series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.), non-aggressive to the materials of the valve.

The Elephant PA-DA double-acting pneumatic actuator is designed to automate the process of controlling industrial shut-off valves - gates, ball valves. Elephant pneumatic actuators are designed for use both indoors and outdoors. All internal and external parts have an anti-corrosion coating.

Pneumatic distributor Elephant 4V320-10 220V is used to change the direction, start, stop the flow of compressed air in the pneumatic system depending on the external control action.

The Elephant MON manual override with worm gear and HDM reduction gear allows manual setting of the required positioning of the shut-off element by a quarter turn, acting as an alternative to pneumatic, electric or hydraulic quarter-turn actuators. Suitable for both indoor and outdoor installation. The modular design of the manual override is intended to provide the most effective and efficient solution to the entire range of manual override tasks.

 

 

Technical parameters of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Rou63/40/25 c pneumatic actuator PA-DA double-acting, pneumatic valve 4V320-10 220V, manual doubler MON:

Name Meaning
Working environment temperature, °C from -20 to 200
Type of crane device two-way
Application water supply, heat supply, steam supply
Working environment water, steam, petroleum products, neutral media
Connection to the pipeline for welding
Water intake No
Type of flow section full bore
Control type With pneumatic drive
Joining for welding
Control double acting pneumatic actuator
Availability of pneumatic distributor There is

 

 

Sketch of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Ru63/40/25 with double-acting pneumatic actuator PA-DA, pneumatic valve 4V320-10 220V, manual doubler MON

 

Dimensions and dimensions of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Ru63/40/25 c pneumatic actuator PA-DA double-acting, pneumatic valve 4V320-10 220V, manual doubler MON:

DN, mm L, mm D, mm F, mm L1, mm E, mm
10 63 17.2 98 153 120
15 65 21.3 98 153 120
20 75 26.7 98 153 120
25 83 33.5 98 153 120
32 98 42.2 115 174 120
40 112 48.3 135 216 133
50 135 60.5 135 216 133
65 175 73.2 135 216 133
80 198 88.9 160 279 180
100 246 114.3 160 279 180

 

 

Sketch of details and materials of ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Rou63/40/25

 

 

Table of parts and materials for ball valves Elephant BV3232P(3pc)-FP-W-ISO-H Rou63/40/25:

Item No. Part name Material
1 Frame SS316
2 Ball valve S304/S316
3 Bolt S201/S304
4 screw S201/S304
5 Sealing PTFE
6 Stock SS304/SS316
7 Seal S201/S304
8 Sealing ring VITON
9 Lid WCB/CF8/CF8M
10 Saddle rings PPL
11 Thrust washer PTFE

 

 

Technical parameters of the PA-DA double-acting pneumatic actuator:

Name Meaning
Model PA-DA
Design double acting
Control pressure, bar 2 ÷ 8
Availability of manual backup steering wheel

 

 

Sketch of parts and materials of Elephant PA-DA double-acting pneumatic actuator

 

 

Parts and materials table for double-acting pneumatic actuator Elephant PA-DA:

No. Name Material
1 Frame extruded aluminum
2 Side plugs cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clamp stainless steel
15 Indicator plastic
16 Indicator housing plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 Sealing ring NBR
23 Sealing ring NBR
24 Bearing stainless steel
25 Adjusting nut stainless steel
26 Adjustment screw stainless steel
27 Sleeve aluminum

 

 

Technical parameters of the Elephant 4V320-10 220V pneumatic valve

Name Meaning
Type of pneumatic distributor spool valve
Model of pneumatic distributor 4V320-10 220V
Working pressure, bar 1.5 ÷ 1.8
Supply voltage, V 220 V
Response frequency, cycles/sec 5

 

 

Sketch of manual backup Elephant MON

Technical parameters of manual backups Elephant MON:

Name Meaning
Degree of protection, IP 67
Connection type ISO 5211

 

 

Sketch of parts and materials of manual backup Elephant MON


Table of parts and materials of the manual backup Elephant MON:

No. Name Material
1 Rod for mounting a pneumatic actuator Steel 45
2 Sealing ring EPDM
3 Locking spring Spring steel
4 Top end cap Aluminum alloy
5 Screw Steel 304
6 Fixing bracket (main rod) Steel 304
7 Frame Aluminum alloy
8 Sealing ring EPDM
9 Reducer Cast iron VCh50
10 Transition coupling Cast iron VCh40
11 Gearbox rod Cast iron VCh40


Specifications
  • Country of origin
    China
  • Body material
    Stainless steel AISI 316
  • Maximum allowable temperature
    200 °C
  • Connection type
    For welding
  • Control type
    Pneumatic actuator
  • Operating environment
    Water, steam, oil products, neutral media
  • Applications
    Water supply, heat supply, steam supply
  • Nominal pressure
    63 bar
  • Type of seal
    PTFE / PTFE / Teflon
  • Locking material
    Stainless steel AISI 316
  • Manual override
    Handwheel
  • Type of pneumatic actuator
    double action
  • Angle of rotation
    90°

Reviews (0)

Documentation

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D160-57470DN1063 bar €271,44 Out of stock
    D160-57471DN1563 bar €271,46 Out of stock
    D160-57472DN2063 bar €279,73 Out of stock
    D160-57473DN2563 bar €258,12 Out of stock
    D160-57474DN3263 bar €252,52 Out of stock
    D160-57475DN4040 bar €320,77 Out of stock
    D160-57476DN5040 bar €350,54 Out of stock
    D160-57477DN6525 bar €454,61 Out of stock
    D160-57478DN8025 bar €627,19 Out of stock
    D160-57479DN10025 bar €842,64 Out of stock

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).