Elephant  |  SKU: D050-26273

Water Butterfly Valve Elephant WBV1413E-2W-Fb body material - Cast iron GGG50, disk material - Cast iron GGG40, seal - EPDM with double-acting pneumatic actuator DA and limit switch block APL-510N-EX

€120,00
Tax included Shipping calculated at checkout.

Delivery and Shipping

The delivery cost is determined during the checkout process and varies based on several factors, including the product type, delivery time, service provider, and destination country.

If you have any questions about our products, delivery options, or anything else, feel free to reach out.

Description

A water butterfly valve is a type of valve used to control the flow of water or other fluids through a pipeline. It gets its name from the butterfly-shaped disc inside the valve that rotates to open or close the flow. When the valve is fully open, the disc is positioned parallel to the flow direction, allowing unobstructed passage of water. When the valve is closed, the disc is turned perpendicular to the flow, effectively blocking the flow of water. Water butterfly valves are commonly used in various industries and applications, including water treatment plants, sewage systems, irrigation systems, and industrial processes. They are known for their compact design, lightweight construction, and ease of installation. These valves are often preferred for their quick operation, as the disc can be opened or closed with a simple quarter-turn motion. Butterfly valves can be operated manually with a handle or lever, or they can be automated using electric, pneumatic, or hydraulic actuators to control the valve remotely. They are known for their low-pressure drop and relatively low cost compared to other types of valves. It's worth noting that water butterfly valves are specifically designed for use with water and compatible fluids. Different materials and designs may be required for valves intended for use with corrosive or high-pressure fluids. It's important to select the appropriate type of butterfly valve based on the specific application and fluid requirements.

 

 

Technical parameters of water butterfly valve Elephant WBV1413E-2W-Fb body material - Cast iron GGG50, disk material - Cast iron GGG40, seal - EPDM with double-acting pneumatic actuator DA and limit switch block APL-510N-EX:

Parameter Value
Nominal diameter DN, mm 40 – 300
Nominal pressure PN, MPa (kg/cm2) 1,6 (16)
Flow direction two-way
Maximum working medium temperature t, ⁰C To +110
Operating medium cold and hot water, air without oil and grease, stationary conditioning, slightly aggressive media, other media neutral to the material
Type of control Bare stem (without handle) / with handle / with electric actuator / with gearbox


Materials of water butterfly valve Elephant WCB-316L-VITON body material - Carbon steel WCB, disk material - Stainless steel aisi 316l, seal - Viton with pneumatic actuator Elephant DA, pneumatic distributor 4M310-08 220V and limit switch block APL-410N EX:

№ Name Material
1 Body Cast iron GGG50
2 Disk High-strength cast iron
3 Seat seal EPDM
4 Upper stem steel AISI 420
5 Lower stem steel AISI 420
6, 11 Retaining ring steel AISI 201
7 Duster NBR
8 Stem gasket NBR
9 Liner steel AISI 201
10 Cork plastic


Overall and installation dimensions of water butterfly valve Elephant WBV1413E-2W-Fb body material - Cast iron GGG50, disk material - Cast iron GGG40, seal - EPDM with double-acting pneumatic actuator DA and limit switch block APL-510N-EX:

DN A B C E G L M
40 298.4 55 72 153 71 33 121.4
50 371.4 80 89 174 82 43 121.4
65 385.4 89 89 174 82 45 121.4
80 391.4 95 89 174 82 45 121.4
100 430.4 114 109 216 101 52 121.4
125 443.4 127 109 216 101 55 121.4
150 481.4 139 134 279 119 55 121.4
200 538.4 175 157 308 137.5 60 121.4
250 587.4 203 174 405 153 68 121.4
300 632.4 242 174 405 153 78 121.4

 

 

Technical characteristics of DA pneumatic actuators:

Design Double-acting
Nominal pressure PN, bar 12
Operating pressure, bar 2…8
Operating medium Filtered compressed air or non-aggressive gases, oils
Maximum particle diameter less than 30 µm2
Operating temperature t, ⁰C • from -20 to +80
• from -40 to +80 (low-temperature version)
• from -20 to +160 (in dry air)
Adjustment range ± 5° for rotation at 0° and 90°
Manual duplication yes
Position indicator open/closed
Operating environment indoors and outdoors. (All internal and external parts have an anti-corrosion coating)


 

Pneumatic actuator component materials Elephant DA:

№ Name Material
1 Body extruded aluminum
2 Side caps cast aluminum
3 Gear stainless steel
4 Piston steel/aluminum
5 Plugs stainless steel
6 Piston ring NBR
7 Springs spring steel
8 Piston bearing engineering plastic
9 Piston ring NBR
10 Plug NBR
11 Thrust ring engineering plastic
12 Ring engineering plastic
13 Washer stainless steel
14 Spring clip stainless steel
15 Indicator plastic
16 Indicator body plastic
17 Bearing engineering plastic
18 Cam steel
19 Bearing NBR
20 Bearing engineering plastic
21 Bearing engineering plastic
22 O-ring NBR
23 O-ring NBR
24 Bearing stainless steel
25 Adjustment nut stainless steel
26 Adjustment screw stainless steel
27 Bushing aluminum

 

 

Characteristics of limit switch unit APL-510N-EX:

Parameter Value
Body weatherproof IP67/ NEMA4 4X,7,9
explosion-proof E EX d IIC T6
Compatible devices - quarter-turn pneumatic actuators;
- any actuators with a 90° shaft rotation
Full swivel angle 90°
Cable glands 2 x NPT 3/4”
Electrical connection Screw terminal clamps, 8 points (0.08 – 2.5 mm²)
Cable entry thread 2 x NPT 3/4”
Type of visual indicator two-color hemisphere: OPEN (Open) - yellow CLOSED (Closed) - red
Switches/sensors two mechanical switches two proximity sensors
Nominal voltage, V 250
Nominal current, A 16
Permissible ambient temperature, °С from -20 to +66
Average life, cycles 10 000 000
Weight, kg 1.8

 

Specifications
  • Country of origin
    China
  • Body material
    Cast iron GGG50/EN-GJS-500-7
  • Maximum allowable temperature
    110 °C
  • Connection type
    Compact flanged
  • Control type
    Pneumatic actuator
  • Nominal pressure
    16 bar
  • Type of seal
    EPDM
  • Disc material
    Cast iron GGG40/EN-GJS-400-15
  • Valve feedback
    Limit switches
  • Explosion-proof
    Yes
  • Torque
    59 Nm
  • Pneumatic actuator
    No
  • Manual override
    No
  • Limit switches
    Yes

Reviews (0)

Payment & Security

Payment methods

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Available Variants

    SKUConnection sizePressurePrice AvailabilityQuantity Add to cart
    D050-26273DN5016 bar €120,00 77 in stock
    D050-26275DN8016 bar €127,00 77 in stock
    D050-26276DN10016 bar €135,00 77 in stock
    D050-26277DN12516 bar €146,00 77 in stock
    D050-26278DN15016 bar €155,00 77 in stock
    D050-26279DN20016 bar €187,00 77 in stock
    D050-26280DN25016 bar €225,00 77 in stock
    D050-26281DN30016 bar €302,00 77 in stock
    D050-26272DN4016 bar €119,00 77 in stock
    D050-26274DN6516 bar €124,00 77 in stock

    Frequently Asked Questions

    Shipping

    What countries do you ship to?

    We currently offer shipping within France and across the EU, as well as international shipping options. If you have a specific destination in mind that is not listed, please don’t hesitate to contact us for more information.

    How long will it take to receive my order?

    Standard shipping normally takes 3-7 days. Next day shipping is available on all domestic orders (for an additional charge). International shipping times depend on the products and destination (estimated at checkout).

    Returns and Refunds

    How do I return a product?

    Items must be returned within 30 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

    How long will it take to receive my refund?

    Refunds are processed within 7 days from when we receive the item(s).