Stainless steel ball valve Elephant RP.SS316.200.MM.ISO 914 PSI threaded, standard port, three way, L-type, body material - stainless steel AISI 316, pneumatic actuator DA, limit switch block APL-410N EX, manual override HDM

Stainless steel ball valve is used as a shut-off valve in heat and water supply systems, steam, fuel and pneumatic systems with compressed air and neutral gases. Installation of valves of this series is possible in systems transporting liquid and gaseous media (water, oil, oils, steam, air, alcohols, glycol, etc.) that are non-aggressive to the materials of the valve.

Parameters of the ball valve Elephant BV3232P(4pc)-SP-3WL-T-ISO-H DN10 with pneumatic actuator PA-DA-065, limit switch unit APL-410N EX and manual backup MON:

• Nominal diameter DN - 10 mm
• Nominal pressure PN - 63 bar
• Sealing class according to GOST 9544-2015 - "A"
• Body material - Stainless steel AISI/SS 316/08Х17Н13М2
• ISO flange type of fittings - F03, F04
• The size of the reinforcement shaft (square) is 9x9 mm
• Torque on shaft - 2 Nm
• Ball material - stainless steel
• Seal type - PTFE
• Connection - Internal thread
• The type of the tap device is three-way
• The valve ball passage is standard passage
• Water tap - no
• Control type - double-acting pneumatic actuator
• Environment - water, air, steam, neutral media
• Country of manufacture of the drive - China
• Application area - heat supply
• Weight of shut-off valves - 0.53 kg
• Drive weight - 1.9 kg
• Total weight - 5.43 kg

Sketch of ball valve Elephant BV3232P(4pc)-SP-3WL-T-ISO-H Ду10 with PA-DA-065, limit switch block APL-410N EX and manual backup MON

Overall and installation dimensions of the ball valve Elephant BV3232P(4pc)-SP-3WL-T-ISO-H Du10 with pneumatic actuator PA-DA-065:

• DN - 10 mm
• D - 10 mm
• L±1.5 - 71 mm
• L1 - 174 mm

Sketch of materials of ball valve Elephant BV3232P(4pc)-SP-3WL-T-ISO-H Du10

Materials of the BV3232P(4pc)-SP-3WL-T-ISO-H ball valve parts:

Parameters of the pneumatic actuator PA-DA-065:

• Pneumatic actuator type - double acting
• Nominal torque - 43 Nm
• Working pressure of the pneumatic drive - 8 bar
• Drive rotation angle - 90°
• Drive adjustment range - 5°
• Availability of manual backup - steering wheel
• Drive weight - 1.9 kg
• Country of origin - China

Sketch of materials of pneumatic drive PA-DA-065

Materials of pneumatic actuator PA-DA-065:

Parameters of the limit switch block APL-410N EX:

• Limit switch block model - APL-410N EX
• Cable entry for limit switches - 2 x NPT1/2"
• Maximum current - 5 A
• Maximum voltage - 250 V
• Protection class of the case - 67
• Explosion protection - yes

Materials of the APL-410N EX limit switch block: